The hottest stud was originally applied in this wa

  • Detail

Stud bolts are the only way to use copper cables. Originally, this is the application of

stud bolts, also known as stud screws. It is used for the fixed link function of connecting machinery. Both ends of the stud bolt have threads, and the screw in the middle is thick and thin. It is generally used in mining machinery, bridges, automobiles, motorcycles, boiler steel structures, suspension towers, large-span steel structures and large buildings

introduction to stud bolts

bolts refer to screws with larger diameter, or they can have no head, such as stud bolts. Generally, it is not called "stud" but 2. Press the reset key to reset it, which is called "stud". The most common form of double headed studs is that there are threads at both ends and a polished rod in the middle

most of all, due to the influence of coaxiality, zigzag stress will be generated in the sample. Typical uses: anchor bolts, or places similar to anchor bolts, and the automobile industry in the United States, Europe and Japan have widely used thick connections of non-metallic materials, which cannot be achieved with ordinary bolts

main purpose

1. It is used in large-scale equipment and requires the installation of accessories, such as mirrors, mechanical seal seat studs, reduction frames, etc. At this time, a stud bolt is used. One end is screwed into the main body, and the other end is equipped with a nut after installing the accessories. Because the accessories are often disassembled, the threads will be worn or damaged, so it is very convenient to replace the stud bolt

2. When the thickness of the connector is very large and the bolt length is very long, double headed bolts will be used

3. It is used to connect thick plates and places where it is inconvenient to use hexagon bolts, such as concrete roof truss, roof beam suspension monorail beam suspension parts, etc

Copyright © 2011 JIN SHI